Laser skurðarvélTRUMPF
TruMatic 7000 K02 (Mittelformat)

Upplýsingar um vélina
- Heiti vélar:
- Laser skurðarvél
- framleiðandi:
- TRUMPF
- framleiðsluár:
- 2009
- Ástand:
- tilbúinn til notkunar (notaður)
- virkni:
- fullkomlega virkur
- Vinnustundir:
- 54.710 h
Tæknilegar upplýsingar
- Leiserafl:
- 4.000 W
- Plötþykkt (hámark):
- 8 mm
- X-áss færi:
- 2.550 mm
- Y-áss færsla:
- 1.250 mm
veiting
- Staðsetning:
- Rheinland-Pfalz, Þýskaland
– Fjarlægð: um 2.287 km
- Aðgengi:
- strax eftir að uppboði lýkur
- Afhendingarskilmálar:
- FCA
10.000,00 EUR (bindandi)
ókeypis
Lýsing
TECHNICAL DETAILS
X-working area: max. 2,550 mm
Y-working area: max. 1,250 mm
Control: Rexroth IndraMotion MTX
Travel speeds
X-axis: 100 m/min
Y-axis: 60 m/min
Simultaneous (X and Y): 116 m/min
C-axis and stroke sequences
C-axis punching: 330 rpm
C-axis thread forming: 330 rpm
Max. punching stroke rate (E = 1 mm): 1,200 rpm
Max. stroke rate for marking: 2,800 rpm
Tool technology
Linear magazine: 22 tools with 3 clamps
Number of tools when using MultiTool: 22 – 220
Tool change time: 0.3 – 2.8 s
Laser
Laser power: 4,000 W
Laser type: CO₂ laser TruFlow 4000
Lens: 170 mm
C-axis rotation: 360°
Laser control: TASC
Functions: Thread forming, MultiBend, MultiTool, deburring and rolling technology
Punching
Punching force: 220 kN
Punching head: electro-hydraulic
Tool rotation: 360°
Hold-down device: programmable (active / passive / repositioning)
MACHINE DETAILS
Dimensions (L x W): 8,000 x 6,700 mm
Height: 2,500 mm
Weight: 24,100 kg
Operating hours
Control operating time: 58,842 h
Laser operating time: 54,710 h
Beam operating time: 15,518 h
EQUIPMENT
- 3 clamps
- Cinder cone detection
- Flap for laser parts 500 x 500 mm with sensor
- 2 good part containers for punched and laser parts
- Chip container
- Ejection cylinder for laser parts
- Quick-change device for cutting head
- Punching slug extraction
- adaptive stroke calibration
- Programmable hold-down device (active / passive / repositioning)
- Tool length compensation
- active matrix
- Parts conveyor belt at punching and laser station
- Chip conveyor with tipping container
- Blow-out device for small parts
- SheetMaster with suction cup frame (36 suction cups, Y-axis 400 mm, V-axis 170 mm)
- Peeling vacuum cleaner with vacuum sensors
- automatic clamp closing
- Sheet thickness gauge for double sheet control
- GripMaster with scrap skeleton tilting pallet (2,500 x 1,250 mm)
- Unloading double wagon
- Parts conveyor belt punching station
- Parts conveyor belt laser station
- Storage interface
- Table extension
- Brush tables
- various safety devices
Þessi auglýsing var sjálfvirkt þýdd. Villa í þýðingu gæti verið til staðar.
Greiðsla meðhöndlun
- aukakostnaður við kaup:
- 18 %
- Greiðsluskilmálar:
- 100 % fyrirframgreiðsla
- Greiðslumáti:
bankafærslu
Tilboðsupplýsingar
- Auglýsingarauðkenni:
- A19083311
- Tilvísunarnúmer:
- AUC-2504153
- uppfærsla:
- síðast þann 08.05.2025
- Einkar tilboð:
- aðeins í boði á uppboði
skoðun
Auction Conditions
The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.
- Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
- All prices and bids are net prices and do not include VAT.
- Stated dismantling and loading costs are binding.
- All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
- Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
- The duration of an auction may be subject to change.
- By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
- Submitted direct or maximum bids are binding.
- Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
- The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
- In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of 18 % net on the buyer’s net bid (unless stated differently in the listing).
- The General Auction Terms of Machineseeker Group GmbH apply.