Blý/fóðursnælda rennibekkurVÖEST
DA 180
Blý/fóðursnælda rennibekkur
VÖEST
DA 180
föst verð aukaskattur bætist við
9.500 EUR
Ástand
Notað
Staðsetning
Haiger 

Myndir sýna
Sýna kort
Upplýsingar um vélina
Verð og staðsetning
föst verð aukaskattur bætist við
9.500 EUR
- Staðsetning:
- Hüttenstr 66-68, 35708 Haiger, DE
Hringdu
Tilboðsupplýsingar
- Auglýsingarauðkenni:
- A20343550
- uppfærsla:
- síðast þann 21.10.2025
Lýsing
Voest DA 180
Voest Alpine DA 180 Conventional Lathe with Digital Readout, Year of Manufacture 1981, in Very Good Original Condition
The machine comes from the training workshop of a renowned German mechanical engineering company.
Technical Data:
Knedpfx Afexp I D Tewjc
VOEST ALPINE Lathe
Lead and feed screw lathe, Type DA 180/1, Year of Manufacture 1981
Swing over bed: 380 mm
Swing over cross slide: 185 mm
Turning length: 1,000 mm
Centre height: 180 mm
Bed width: 330 mm
Spindle bore: 52 mm
Tailstock taper: MK 4
Coolant system
Motor: 380 Volt, 5.5 kW
12 spindle speeds: 44 - 2,000 rpm
66 longitudinal feeds: 0.072 - 4.038 mm/rev
66 cross feeds: 0.036 - 2.019 mm/rev
66 metric threads: 0.5 - 28 mm
66 inch threads: 1 - 32 TPI
66 module threads: 0.25 - 14
66 DP threads: 2 - 112
3-jaw chuck
Weight approx. 1,200 kg
Accessories and Equipment:
1 piece Röhm 3-jaw chuck 200 mm
Multifix size B
Digital readout
About the Machine:
We offer a Voest Alpine DA 180 conventional lathe with digital readout, year of manufacture 1981, in very good condition. The machine is, of course, fully functional. All slides run very smoothly and evenly. The Voest also runs very quietly, even at high speeds. This newer generation of lathes is very operator-friendly and can produce grind-finish-quality surfaces. Take the opportunity to inspect this machine under power at our premises and see its condition for yourself.
You can find further drilling machines from reputable manufacturers on our website.
Þessi auglýsing var sjálfvirkt þýdd. Villa í þýðingu gæti verið til staðar.
Voest Alpine DA 180 Conventional Lathe with Digital Readout, Year of Manufacture 1981, in Very Good Original Condition
The machine comes from the training workshop of a renowned German mechanical engineering company.
Technical Data:
Knedpfx Afexp I D Tewjc
VOEST ALPINE Lathe
Lead and feed screw lathe, Type DA 180/1, Year of Manufacture 1981
Swing over bed: 380 mm
Swing over cross slide: 185 mm
Turning length: 1,000 mm
Centre height: 180 mm
Bed width: 330 mm
Spindle bore: 52 mm
Tailstock taper: MK 4
Coolant system
Motor: 380 Volt, 5.5 kW
12 spindle speeds: 44 - 2,000 rpm
66 longitudinal feeds: 0.072 - 4.038 mm/rev
66 cross feeds: 0.036 - 2.019 mm/rev
66 metric threads: 0.5 - 28 mm
66 inch threads: 1 - 32 TPI
66 module threads: 0.25 - 14
66 DP threads: 2 - 112
3-jaw chuck
Weight approx. 1,200 kg
Accessories and Equipment:
1 piece Röhm 3-jaw chuck 200 mm
Multifix size B
Digital readout
About the Machine:
We offer a Voest Alpine DA 180 conventional lathe with digital readout, year of manufacture 1981, in very good condition. The machine is, of course, fully functional. All slides run very smoothly and evenly. The Voest also runs very quietly, even at high speeds. This newer generation of lathes is very operator-friendly and can produce grind-finish-quality surfaces. Take the opportunity to inspect this machine under power at our premises and see its condition for yourself.
You can find further drilling machines from reputable manufacturers on our website.
Þessi auglýsing var sjálfvirkt þýdd. Villa í þýðingu gæti verið til staðar.
Bjóðandi
Athugasemd: Skráðu þig ókeypis eða skráðu þig inn, til að fá aðgang að öllum upplýsingum.
Skráð frá: 2019
Senda fyrirspurn
Sími & Fax
+49 2773 ... auglýsingar
Þessar auglýsingar gætu einnig vakið áhuga þinn.
lítil auglýsing

2.280 km
Miðstöð rennibekkur og snælda rennibekkur
Voest-AlpineDA180/0,8
Voest-AlpineDA180/0,8
lítil auglýsing

2.727 km
Blý/fóðursnælda rennibekkur
VoestDA 180
VoestDA 180
Auglýsingunni þinni hefur verið eytt með góðum árangri
Villa kom upp