Blý/fóðursnælda rennibekkurWeiler
Commodor Geometrisch Überholt
Blý/fóðursnælda rennibekkur
Weiler
Commodor Geometrisch Überholt
Ástand
Notað
Staðsetning
Ubstadt-Weiher 

Myndir sýna
Sýna kort
Upplýsingar um vélina
- Heiti vélar:
- Blý/fóðursnælda rennibekkur
- Framleiðandi:
- Weiler
- Ástand:
- næstum eins og nýtt (notað)
- Virkni:
- fullkomlega virkur
Verð og staðsetning
- Staðsetning:
- Großer Sand 19-21, 76698 Ubstadt-Weiher, Deutschland

Hringdu
Tilboðsupplýsingar
- Auglýsingarauðkenni:
- A18286861
- Uppfærsla:
- síðast þann 17.01.2025
Lýsing
Weiler Commodor guide and feed spindle lathe with 3-axis digital display K&C NEW Overhauled with acceptance certificate for tolerances of new machines
Technical data:
>> Machine no. 2020
>> Center height 180 mm
>> Center width 1000 mm
>> Spindle speeds: from 13 to 2000 rpm
>> Spindle passage 56 mm
>> Short taper spindle head DIN 55029 size 5
>> Tailstock MK 4
>> Feeds from 0.026 to 0.888 mm / rev
>> Possible threads metric, inch, module and diametrical pitch
>> Metric thread pitches from 0.35 to 12 mm
>> Weight approx. 1500 kg
>> Spindle brake can be switched on
>> Drive power 2.0/4.0 KW
Bdodpfx Adsvrckqepek
>> Length 2.2 m, height 1.5 m, depth 1 m
Accessories and equipment:
>> 3-axis digital display from K&C New, 12-month manufacturer's guarantee with operating instructions
Functions: Switching mm/inch, coordinate selection ABS/INC, halving of the display value, reference mark, tool programming 200 pcs., cone calculation, radius / diameter, quick zeroing, switching of the counting direction,
>> Three-jaw chuck wedge bars as good as new 200mm 1 set of jaws
>> Mulifix size B with 2 pcs steel holders NEW
>> Bed stop
>> Machine feet
>> Coolant system
>> LED machine lamp
For safety, the machine is equipped with:
>> Electronic spindle protection
>> Spindle brake
>> 2 emergency stops
On request: covers for the guide. and feed spindle
About the machine:
A Weiler Commodor guide and feed spindle lathe is offered in a geometrically overhauled condition. The guides have been reground or re-scraped. With acceptance according to the test report. 2K glossy white paint.
The Multifix and chuck accessories are new.
For safety: The machine has a brake motor, electronic spindle protection and two emergency stops - an absolutely new lathe. The Weiler runs very quietly even at high speeds. This new generation of Weiler lathes is very user-friendly and surfaces can be produced as if they were ground. Take the opportunity to view this machine on site under power and see for yourself its condition.
Þessi auglýsing var sjálfvirkt þýdd. Villa í þýðingu gæti verið til staðar.
Technical data:
>> Machine no. 2020
>> Center height 180 mm
>> Center width 1000 mm
>> Spindle speeds: from 13 to 2000 rpm
>> Spindle passage 56 mm
>> Short taper spindle head DIN 55029 size 5
>> Tailstock MK 4
>> Feeds from 0.026 to 0.888 mm / rev
>> Possible threads metric, inch, module and diametrical pitch
>> Metric thread pitches from 0.35 to 12 mm
>> Weight approx. 1500 kg
>> Spindle brake can be switched on
>> Drive power 2.0/4.0 KW
Bdodpfx Adsvrckqepek
>> Length 2.2 m, height 1.5 m, depth 1 m
Accessories and equipment:
>> 3-axis digital display from K&C New, 12-month manufacturer's guarantee with operating instructions
Functions: Switching mm/inch, coordinate selection ABS/INC, halving of the display value, reference mark, tool programming 200 pcs., cone calculation, radius / diameter, quick zeroing, switching of the counting direction,
>> Three-jaw chuck wedge bars as good as new 200mm 1 set of jaws
>> Mulifix size B with 2 pcs steel holders NEW
>> Bed stop
>> Machine feet
>> Coolant system
>> LED machine lamp
For safety, the machine is equipped with:
>> Electronic spindle protection
>> Spindle brake
>> 2 emergency stops
On request: covers for the guide. and feed spindle
About the machine:
A Weiler Commodor guide and feed spindle lathe is offered in a geometrically overhauled condition. The guides have been reground or re-scraped. With acceptance according to the test report. 2K glossy white paint.
The Multifix and chuck accessories are new.
For safety: The machine has a brake motor, electronic spindle protection and two emergency stops - an absolutely new lathe. The Weiler runs very quietly even at high speeds. This new generation of Weiler lathes is very user-friendly and surfaces can be produced as if they were ground. Take the opportunity to view this machine on site under power and see for yourself its condition.
Þessi auglýsing var sjálfvirkt þýdd. Villa í þýðingu gæti verið til staðar.
Bjóðandi
Athugasemd: Skráðu þig ókeypis eða skráðu þig inn, til að fá aðgang að öllum upplýsingum.
Skráð frá: 2007
Senda fyrirspurn
Sími & Fax
+49 7251 ... auglýsingar
Þessar auglýsingar gætu einnig vakið áhuga þinn.
lítil auglýsing
Ubstadt-Weiher
2.387 km
Blý/fóðursnælda rennibekkur
WeilerCommodor Geometrisch Überholt
WeilerCommodor Geometrisch Überholt
lítil auglýsing
Hilzingen
2.529 km
Háhraða gatavél
BRUDERERBSTA 60 HL
BRUDERERBSTA 60 HL
lítil auglýsing
Europe
2.206 km
CNC rennifræsari
INDEXG220
INDEXG220
lítil auglýsing
Bitburg
2.234 km
Bor-fræsivél
BernardoFM 45 V
BernardoFM 45 V
lítil auglýsing
Immendingen
2.510 km
Svissneskur rennibekkur
HanwhaXD20II-M Fanuc FMB 2-20 turbo
HanwhaXD20II-M Fanuc FMB 2-20 turbo
lítil auglýsing
Contamine-sur-Arve
2.598 km
CNC sjálfvirkur rennibekkur
INDEXG200
INDEXG200
lítil auglýsing
Feucht
2.473 km
Verkfærafræsivél
DECKELFP 2
DECKELFP 2
lítil auglýsing
Velen
2.072 km
Kaldt hringlaga saga
BERG & SCHMIDVKS 370 HA MPS
BERG & SCHMIDVKS 370 HA MPS
lítil auglýsing
Mögglingen
2.475 km
Yfirborðs mala vél
PROTHPSGS 4080 AH
PROTHPSGS 4080 AH
lítil auglýsing
Hattingen
2.126 km
Svissneskur rennibekkur
CITIZENM 20
CITIZENM 20
Auglýsingunni þinni hefur verið eytt með góðum árangri
Villa kom upp


















































































