AflátursarnsmiðjaWMW Niles
DH 250
Aflátursarnsmiðja
WMW Niles
DH 250
Föst verð aukaskattur bætist við
4.000 USD
Ástand
Notað
(fullkomlega virkur)
Staðsetning
Русе 

Grunnupplýsingar
- Heiti vélar:
- Aflátursarnsmiðja
- Framleiðandi:
- WMW Niles
- Gerð:
- DH 250
- Ástand:
- tilbúinn til notkunar (notaður)
- Virkni:
- fullkomlega virkur
Verð og staðsetning
Föst verð aukaskattur bætist við
4.000 USD
- Staðsetning:
- ulitsa "Nikolaevska" 80, 7001 Ruse, Bulgaria

Hringdu
Tæknilegar upplýsingar
Mál og þyngd
Heildarlengd:
2.750 mm
Heildarbreidd:
2.975 mm
Heildarhæð:
1.100 mm
Spindlar
Spindilsmótorsafl:
4.000 W
Skjöl og vottun
Skjöl / handbók
Frekari upplýsingar
Snúningsþvermál:
250 mm
Snúningsþvermál yfir þversleða:
250 mm
Miðjuhæð:
270 mm
Miðju hæð á sveifarás:
138 mm
Breidd miðju:
900 mm
Klemmudmál:
250 mm
Keilafesting:
5 mm
Diskur þvermál:
250 mm
Mestaþráður (hámark):
10 mm
Lágmarks metraþráðstigning:
25 mm
Svið snúnings:
360 °
Quill þvermál:
80 mm
Fjaðrardrag:
16 mm
Fjarlægð kúluferðar:
32 mm
Snúningshraði (hámark):
450 snúningur/mín.
Snúningshraði (mín.):
28 snúningur/mín.
Sveifluþvermál yfir þverrennslu:
250 mm
Sveifluþvermál yfir þversleða:
250 mm
Snúningsþvermál yfir bekkskefli:
250 mm
Rúnlengd:
630 mm
Snúningshraði óendanlega breytilegur
Tilboðsupplýsingar
- Auglýsingarauðkenni:
- A20887357
- Tilvísunarnúmer:
- MSHN8-WMWNDH250
- Uppfærsla:
- síðast þann 09.11.2026
Lýsing
Relieve Turning Lathe NILES DH 250/4
(Specialized relieving and profiling lathe)
The NILES DH 250/4 is a precision relieve turning lathe designed for the efficient execution of profile turning, relieving, and finishing operations on cylindrical parts up to 250 mm diameter. Manufactured by NILES, a reputable German machine tool builder, this machine combines rigid mechanical construction with smooth motion control to deliver consistent results in demanding workshop environments.
This machine is ideally suited for toolrooms, repair shops, and manufacturing facilities where relief turning of tools and components is required. Its sturdy built-in relieving device ensures high accuracy and repeatability for profiling tasks, including operations that cannot be performed easily on standard lathes.
The faceplate diameter of 250 mm accommodates a wide range of workpieces up to 250 mm in turning diameter, with a turning length of 630 mm. Workpieces are securely positioned on the well-designed center system, featuring a center height of 270 mm over bed parallels and a center width of 900 mm. The machine’s removable chuck plate and Morse taper No. 5 mount provide flexibility for different holding and tooling options.
Isdpfjx Sq H Sox Ac Ejtp
The lathe’s spindle offers an infinitely variable speed range from 28 to 450 rpm, driven by a robust 4 kW spindle motor, allowing precise speed selection for both rough and finish relieving cuts. The built-in quill is 80 mm in diameter with a maximum stroke of 16 mm, enabling controlled profiling movements.
The NILES DH 250/4 is supported by its factory documentation, making it straightforward to integrate into industrial workflows and maintenance routines. The overall construction — approximately 2750 mm in length, 2975 mm in width, and 1100 mm in height — reflects its stable and durable design.
Key Features:
*Relief turning lathe for specialized profiling operations
*Maximum turning diameter: 250 mm
*Turning length up to 630 mm
*Faceplate diameter: 250 mm
*Center height: 270 mm
*Infinitely variable spindle speed: 28 – 450 rpm
*Spindle drive power: 4 kW
*Quill diameter: 80 mm, stroke 16 mm
*Morse taper No. 5 spindle mount
*Heavy industrial construction with factory documentation
Typical Applications:
*Relieving and profiling cylindrical components
*Tool relief turning and finish profiling
*Small series specialized machining
*Maintenance and toolroom work
(Specialized relieving and profiling lathe)
The NILES DH 250/4 is a precision relieve turning lathe designed for the efficient execution of profile turning, relieving, and finishing operations on cylindrical parts up to 250 mm diameter. Manufactured by NILES, a reputable German machine tool builder, this machine combines rigid mechanical construction with smooth motion control to deliver consistent results in demanding workshop environments.
This machine is ideally suited for toolrooms, repair shops, and manufacturing facilities where relief turning of tools and components is required. Its sturdy built-in relieving device ensures high accuracy and repeatability for profiling tasks, including operations that cannot be performed easily on standard lathes.
The faceplate diameter of 250 mm accommodates a wide range of workpieces up to 250 mm in turning diameter, with a turning length of 630 mm. Workpieces are securely positioned on the well-designed center system, featuring a center height of 270 mm over bed parallels and a center width of 900 mm. The machine’s removable chuck plate and Morse taper No. 5 mount provide flexibility for different holding and tooling options.
Isdpfjx Sq H Sox Ac Ejtp
The lathe’s spindle offers an infinitely variable speed range from 28 to 450 rpm, driven by a robust 4 kW spindle motor, allowing precise speed selection for both rough and finish relieving cuts. The built-in quill is 80 mm in diameter with a maximum stroke of 16 mm, enabling controlled profiling movements.
The NILES DH 250/4 is supported by its factory documentation, making it straightforward to integrate into industrial workflows and maintenance routines. The overall construction — approximately 2750 mm in length, 2975 mm in width, and 1100 mm in height — reflects its stable and durable design.
Key Features:
*Relief turning lathe for specialized profiling operations
*Maximum turning diameter: 250 mm
*Turning length up to 630 mm
*Faceplate diameter: 250 mm
*Center height: 270 mm
*Infinitely variable spindle speed: 28 – 450 rpm
*Spindle drive power: 4 kW
*Quill diameter: 80 mm, stroke 16 mm
*Morse taper No. 5 spindle mount
*Heavy industrial construction with factory documentation
Typical Applications:
*Relieving and profiling cylindrical components
*Tool relief turning and finish profiling
*Small series specialized machining
*Maintenance and toolroom work
Bjóðandi
Athugasemd: Skráðu þig ókeypis eða skráðu þig inn, til að fá aðgang að öllum upplýsingum.
Síðast á netinu: í síðustu viku
Skráð frá: 2025
6 Auglýsingar á netinu
Senda fyrirspurn
Sími & Fax
+359 82 2... auglýsingar
Þessar auglýsingar gætu einnig vakið áhuga þinn.
Fullgengt
Skilaboðin þín hafa verið send.
Lítil auglýsing
Þýskaland
2.341 km
Chuck - 3ja kjálka chuck
WMW NILESDH B/8 - 250x3
WMW NILESDH B/8 - 250x3
Fullgengt
Skilaboðin þín hafa verið send.
Lítil auglýsing
Neulingen-Göbrichen
2.412 km
Broaching Machine lóðrétt
EKINRISZ 10/1000
EKINRISZ 10/1000
Fullgengt
Skilaboðin þín hafa verið send.
Lítil auglýsing
Þýskaland
2.341 km
Chuck - 3ja kjálka chuck
WMW NILESDH-A-250x3
WMW NILESDH-A-250x3
Fullgengt
Skilaboðin þín hafa verið send.
Lítil auglýsing
Wiefelstede
1.999 km
Plötuspilari
WMW NilesDH250x3-III
WMW NilesDH250x3-III
Fullgengt
Skilaboðin þín hafa verið send.
Lítil auglýsing
Pforzheim
2.418 km
Verkfæravél
Schütte325 linear
Schütte325 linear
Fullgengt
Skilaboðin þín hafa verið send.
Lítil auglýsing
Þýskaland
2.341 km
Aftur rennibekkur
WMWDH 250III x630
WMWDH 250III x630
Fullgengt
Skilaboðin þín hafa verið send.
Lítil auglýsing
Ubstadt-Weiher
2.387 km
Verkfæri mala vél
Michael DeckelS11
Michael DeckelS11
Fullgengt
Skilaboðin þín hafa verið send.
Lítil auglýsing
Düsseldorf
2.125 km
Verkfærakvörn
KlingelnbergSNC 30
KlingelnbergSNC 30
Fullgengt
Skilaboðin þín hafa verið send.
Lítil auglýsing
Þýskaland
2.341 km
Sívalur mala vél - alhliða
KELLENBERGER1000-175
KELLENBERGER1000-175
Fullgengt
Skilaboðin þín hafa verið send.
Lítil auglýsing
Írland
1.575 km
Verkfærakvörn
Schütte305 Linear
Schütte305 Linear
Auglýsingunni þinni hefur verið eytt með góðum árangri
Villa kom upp








































































