Zeiss Contura Vast XT Gold mælivél (samræmdismælingavél, CMM)Zeiss
CONTURA 9/18/8
Zeiss Contura Vast XT Gold mælivél (samræmdismælingavél, CMM)
Zeiss
CONTURA 9/18/8
EXW Föst verð aukaskattur bætist við
110.000 EUR
Framleiðsluár
2020
Ástand
Notað
(fullkomlega virkur)
Staðsetning
Budapest 

Upplýsingar um vélina
- Framleiðandi:
- Zeiss
- Gerð:
- CONTURA 9/18/8
- Framleiðsluár:
- 2020
- Ástand:
- mjög gott (notað)
- Virkni:
- fullkomlega virkur
- Vinnustundir:
- 12.500 h
Verð og staðsetning
EXW Föst verð aukaskattur bætist við
110.000 EUR
- Staðsetning:
- Budapest, Ungverjaland

Hringdu
Tæknilegar upplýsingar
- X-áss færi:
- 900 mm
- Y-áss færsla:
- 1.800 mm
- Förfaravegalengd Z-áss:
- 800 mm
- Inngangsspenna:
- 230 V
- Síðasta yfirhaldsár:
- 2025
- Búnaður:
- skjöl / handbók
Tilboðsupplýsingar
- Auglýsingarauðkenni:
- A22566042
- Uppfærsla:
- síðast þann 17.08.2026
Lýsing
We are offering the following: a Zeiss CONTURA 9/18/8 Vast XT Gold CMM in very good condition, manufactured in 2020.
Type: CMM CONTURA 9/18/8
Year of manufacture: 2020
Operating voltage: 100–240 V
Frequency: 50–60 Hz
We are selling our ZEISS Industrial Quality Solutions Contura 9/18/8 CMM, installed in 2020. It has been housed in a climate-controlled measuring room since day one.
The data, taken directly from Zeiss's service log (as of June 2025):
- 10,284 operating hours
- 169.9 km traveled by the axes combined (X: 49.5 km, Y: 80.4 km, Z: 40.1 km)
- Approximately 2,000 hours per year, consistently, with the same steady pace – no last-minute overtime before we listed it
- Zero significant component replacements
- Relocated, serviced, and recalibrated in June 2025 – all results within tolerance, no laser correction needed
One honest point, because we don't deal in exaggerated claims: the controller logged a few probe collisions over the years, some at higher speeds. However, probe performance was still good and passed the 2025 calibration without issue. We're mentioning this now so you won't find it in the log later and wonder why we didn't disclose it.
Probe head: VAST XT Gold
Software: Calypso CNC 7.2 + QS-Stat-out
Included accessories: PC, monitors, sensor rack
Other accessories (stylii from GOEKELER Messtechnik GmbH, fixturing elements from dk FIXIERSYSTEME GmbH & Co. KG) are available upon request (we have a large supply, please inquire), and you can also take the compressor (from Atlas Copco) and other accessories.
Ijdpfx Aezuzf Iol Ssba
Price: €110,000 net (packed by Zeiss (with the original transport frame and pallet) and loaded onto your truck at our office in Budapest, Hungary)
It has measured everything from a few millimeters to 2 meters and has never failed us; it is still in daily use.
If you have any questions or need further information, please send us a message or call us.
Þessi auglýsing var sjálfvirkt þýdd. Villa í þýðingu gæti verið til staðar.
Type: CMM CONTURA 9/18/8
Year of manufacture: 2020
Operating voltage: 100–240 V
Frequency: 50–60 Hz
We are selling our ZEISS Industrial Quality Solutions Contura 9/18/8 CMM, installed in 2020. It has been housed in a climate-controlled measuring room since day one.
The data, taken directly from Zeiss's service log (as of June 2025):
- 10,284 operating hours
- 169.9 km traveled by the axes combined (X: 49.5 km, Y: 80.4 km, Z: 40.1 km)
- Approximately 2,000 hours per year, consistently, with the same steady pace – no last-minute overtime before we listed it
- Zero significant component replacements
- Relocated, serviced, and recalibrated in June 2025 – all results within tolerance, no laser correction needed
One honest point, because we don't deal in exaggerated claims: the controller logged a few probe collisions over the years, some at higher speeds. However, probe performance was still good and passed the 2025 calibration without issue. We're mentioning this now so you won't find it in the log later and wonder why we didn't disclose it.
Probe head: VAST XT Gold
Software: Calypso CNC 7.2 + QS-Stat-out
Included accessories: PC, monitors, sensor rack
Other accessories (stylii from GOEKELER Messtechnik GmbH, fixturing elements from dk FIXIERSYSTEME GmbH & Co. KG) are available upon request (we have a large supply, please inquire), and you can also take the compressor (from Atlas Copco) and other accessories.
Ijdpfx Aezuzf Iol Ssba
Price: €110,000 net (packed by Zeiss (with the original transport frame and pallet) and loaded onto your truck at our office in Budapest, Hungary)
It has measured everything from a few millimeters to 2 meters and has never failed us; it is still in daily use.
If you have any questions or need further information, please send us a message or call us.
Þessi auglýsing var sjálfvirkt þýdd. Villa í þýðingu gæti verið til staðar.
Bjóðandi
Athugasemd: Skráðu þig ókeypis eða skráðu þig inn, til að fá aðgang að öllum upplýsingum.
Síðast á netinu: Í gær
Skráð frá: 2023
1 Auglýsing á netinu
Senda fyrirspurn
Sími & Fax
+36 20 41... auglýsingar
Auglýsingunni þinni hefur verið eytt með góðum árangri
Villa kom upp










