Kolefnis-brennisteinsgreiningLeco
C 230 Anorganische Elementaranalytik
Kolefnis-brennisteinsgreining
Leco
C 230 Anorganische Elementaranalytik
föst verð aukaskattur bætist við
5.700 EUR
Ástand
Notað
Staðsetning
Borken 

Myndir sýna
Sýna kort
Upplýsingar um vélina
Verð og staðsetning
föst verð aukaskattur bætist við
5.700 EUR
- Staðsetning:
- Einsteinstraße 8a, 46325 Borken, Deutschland

Hringdu
Tilboðsupplýsingar
- Auglýsingarauðkenni:
- A20546160
- Tilvísunarnúmer:
- 24420
- Uppfærsla:
- síðast þann 17.11.2025
Lýsing
Leco
LECO C230 CARBON ANALYZER
Nwedpfoxxaxusx Aatjp
Carbon Determination C230
The LECO C230 Carbon Determiner is a microprocessor-based, software-controlled instrument for measuring the carbon and sulfur content in metals, ores, ceramics, and other inorganic materials. The C230 uses an induction furnace and measures carbon via infrared absorption.
The infrared (IR) source consists of a nichrome wire heated by resistance up to 8,500 °C. The IR source emits visible energy as well as all wavelengths of the infrared spectrum. For description purposes, carbon dioxide can be used; the same principle applies for sulfur detection. Carbon dioxide absorbs IR energy at a specific wavelength within the IR spectrum. Energy from the IR source is absorbed as the gas passes through the cell, thereby preventing it from reaching the IR detector.
One IR cell is used both as a reference and for measurement. The total carbon content in the form of carbon dioxide is captured continuously and simultaneously. The initial reference level or baseline for the detector is set by passing oxygen through the cell to remove any remaining atmospheric gases.
Technical Data:
Required Gases:
Carrier gas: Oxygen, 99.5% pure, 40 psi
Pneumatic gas: Compressed air, nitrogen, or argon, 40 psi (2.76 bar), source must be oil- and water-free
Gas flow (based on nominal analysis time):
Measurement: 3 liters per analysis
Pneumatic: 1 liter per analysis
Regulators:
Oxygen: 501-291 O₂ pressure regulator
Compressed air: 766-036 air pressure regulator
Inert gas: 764-216 inert gas regulator
Furnace: Induction, 18 MHz, 2.2 kW
Data Transfer: Included
Data Storage:
Without PC: 10 sample weights, 50 results, 5 methods
Without PC: Internal memory / Optional external display
Without PC: LCD display (16 x 26 characters)
Power Requirements:
Determinator: 230 V~, ± 10%, 50/60 Hz, single phase, 15 amp max
Operating current: 12 A
Standby current: 4 A
Condition: Used
Scope of delivery: (See image)
(Subject to change and errors in technical data; specifications subject to confirmation!)
For further questions, please feel free to contact us by phone.
Þessi auglýsing var sjálfvirkt þýdd. Villa í þýðingu gæti verið til staðar.
LECO C230 CARBON ANALYZER
Nwedpfoxxaxusx Aatjp
Carbon Determination C230
The LECO C230 Carbon Determiner is a microprocessor-based, software-controlled instrument for measuring the carbon and sulfur content in metals, ores, ceramics, and other inorganic materials. The C230 uses an induction furnace and measures carbon via infrared absorption.
The infrared (IR) source consists of a nichrome wire heated by resistance up to 8,500 °C. The IR source emits visible energy as well as all wavelengths of the infrared spectrum. For description purposes, carbon dioxide can be used; the same principle applies for sulfur detection. Carbon dioxide absorbs IR energy at a specific wavelength within the IR spectrum. Energy from the IR source is absorbed as the gas passes through the cell, thereby preventing it from reaching the IR detector.
One IR cell is used both as a reference and for measurement. The total carbon content in the form of carbon dioxide is captured continuously and simultaneously. The initial reference level or baseline for the detector is set by passing oxygen through the cell to remove any remaining atmospheric gases.
Technical Data:
Required Gases:
Carrier gas: Oxygen, 99.5% pure, 40 psi
Pneumatic gas: Compressed air, nitrogen, or argon, 40 psi (2.76 bar), source must be oil- and water-free
Gas flow (based on nominal analysis time):
Measurement: 3 liters per analysis
Pneumatic: 1 liter per analysis
Regulators:
Oxygen: 501-291 O₂ pressure regulator
Compressed air: 766-036 air pressure regulator
Inert gas: 764-216 inert gas regulator
Furnace: Induction, 18 MHz, 2.2 kW
Data Transfer: Included
Data Storage:
Without PC: 10 sample weights, 50 results, 5 methods
Without PC: Internal memory / Optional external display
Without PC: LCD display (16 x 26 characters)
Power Requirements:
Determinator: 230 V~, ± 10%, 50/60 Hz, single phase, 15 amp max
Operating current: 12 A
Standby current: 4 A
Condition: Used
Scope of delivery: (See image)
(Subject to change and errors in technical data; specifications subject to confirmation!)
For further questions, please feel free to contact us by phone.
Þessi auglýsing var sjálfvirkt þýdd. Villa í þýðingu gæti verið til staðar.
Bjóðandi
Athugasemd: Skráðu þig ókeypis eða skráðu þig inn, til að fá aðgang að öllum upplýsingum.
Skráð frá: 2012
Senda fyrirspurn
Sími & Fax
+49 2861 ... auglýsingar
Þessar auglýsingar gætu einnig vakið áhuga þinn.
lítil auglýsing
Mainz
2.299 km
Rasterrafeindasmásjá (REM)
ZeissXB 350
ZeissXB 350
lítil auglýsing
Köln
2.159 km
Hreint loft vinnubekkur
HeraguardHPH 15
HeraguardHPH 15
lítil auglýsing
Þýskaland
7.393 km
Síukerfi - osmósakerfi
Thermo Fisher ScientificECO 300
Thermo Fisher ScientificECO 300
lítil auglýsing
Borken
2.072 km
Hágæða frumefnagreinir
BrukerS8 TIGER WDXRF Spektrometer
BrukerS8 TIGER WDXRF Spektrometer
lítil auglýsing
Borken
2.072 km
Klimaskápur með raka, 34 lítrar
WeissWKL 34/40 -40...+150°C
WeissWKL 34/40 -40...+150°C
lítil auglýsing
Töltéstava
2.907 km
GC með sjálfvirkum sýnatökubúnaði, FID, tölvu og hugbúnaði.
Agilent6890N
Agilent6890N
lítil auglýsing
Walton-on-the-Naze
1.862 km
Thermo Scientific Dionex Ultimate 3000 UHPLC Focused, 2018
Thermo Fisher ScientificUltimate 3000
Thermo Fisher ScientificUltimate 3000
lítil auglýsing
Duxford
1.800 km
Sartorius SECURA513-1CEU
SartoriusSECURA513-1CEU
SartoriusSECURA513-1CEU
lítil auglýsing
Borken
2.072 km
Saltskýprófunarskápur fyrir tæringartilraunir
VLMSAL 1000-FL PLC / V.715.362.520
VLMSAL 1000-FL PLC / V.715.362.520
lítil auglýsing
Borken
2.072 km
System Trace massarófsmælir
Thermo FinniganMS 2160 mit Finnigan DSQ II
Thermo FinniganMS 2160 mit Finnigan DSQ II
Auglýsingunni þinni hefur verið eytt með góðum árangri
Villa kom upp



















































































































